
0fSPECIAL BOOT ARGUMENTS - VARIOUS HARDWARE07

You can use the following boot arguments at the 0fboot:07 prompt, 
in combination with the boot method (see <09F307>).
If you use hex numbers you have to use the 0x prefix (e.g. 0x300).

0fHARDWARE                               PARAMETER TO SPECIFY07
Monochrome monitor                     09mono07
IBM PS/1 or ValuePoint (IDE disk)      09hd=<cylinders>,<heads>,<sectors>07
IBM ThinkPad                           09floppy=thinkpad07
Protect I/O port regions               09reserve=iobase,extent[,...]07
Workaround faulty FPU (old machines)   09no38707
Advanced Power Management              09apm=on07

0fEthernet:07
Ethernet device drivers and drivers for the proprietary CD-ROM
interfaces are loaded as modules, so you cannot give parameters for
them at the boot prompt.  You can give parameters for them during the
installation process.  See the Installation Manual for details

<09ENTER07> vagy egy indtsi metdus, argumentumok s <09ENTER07> a 
bootolshoz. Az <09F107> billentyvel a tartalomjegyzkhez juthatsz.

