|
|
|
Clutter 0.4 Reference Manual | |
|---|---|---|---|---|
ClutterBehaviourEllipseClass;
ClutterBehaviour* clutter_behaviour_ellipse_new (ClutterAlpha *alpha,
gint x,
gint y,
gint width,
gint height,
ClutterRotateDirection direction,
gdouble begin,
gdouble end);
ClutterBehaviour* clutter_behaviour_ellipse_newx (ClutterAlpha *alpha,
gint x,
gint y,
gint width,
gint height,
ClutterRotateDirection direction,
ClutterFixed begin,
ClutterFixed end);
void clutter_behaviour_ellipse_set_center
(ClutterBehaviourEllipse *self,
gint x,
gint y);
void clutter_behaviour_ellipse_get_center
(ClutterBehaviourEllipse *self,
gint *x,
gint *y);
gdouble clutter_behaviour_ellipse_get_angle_begin
(ClutterBehaviourEllipse *self);
gdouble clutter_behaviour_ellipse_get_angle_end
(ClutterBehaviourEllipse *self);
gdouble clutter_behaviour_ellipse_get_angle_tilt
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis);
gint clutter_behaviour_ellipse_get_height
(ClutterBehaviourEllipse *self);
gint clutter_behaviour_ellipse_get_width (ClutterBehaviourEllipse *self);
void clutter_behaviour_ellipse_set_angle_begin
(ClutterBehaviourEllipse *self,
gdouble angle_begin);
void clutter_behaviour_ellipse_set_angle_end
(ClutterBehaviourEllipse *self,
gdouble angle_end);
void clutter_behaviour_ellipse_set_angle_tilt
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis,
gdouble angle_tilt);
void clutter_behaviour_ellipse_set_height
(ClutterBehaviourEllipse *self,
gint height);
void clutter_behaviour_ellipse_set_width (ClutterBehaviourEllipse *self,
gint width);
ClutterAngle clutter_behaviour_ellipse_get_angle_beginx
(ClutterBehaviourEllipse *self);
ClutterAngle clutter_behaviour_ellipse_get_angle_endx
(ClutterBehaviourEllipse *self);
ClutterAngle clutter_behaviour_ellipse_get_angle_tiltx
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis);
void clutter_behaviour_ellipse_set_angle_beginx
(ClutterBehaviourEllipse *self,
ClutterAngle angle_begin);
void clutter_behaviour_ellipse_set_angle_endx
(ClutterBehaviourEllipse *self,
ClutterAngle angle_end);
void clutter_behaviour_ellipse_set_angle_tiltx
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis,
ClutterAngle angle_tilt);
void clutter_behaviour_ellipse_set_tilt (ClutterBehaviourEllipse *self,
gdouble angle_tilt_x,
gdouble angle_tilt_y,
gdouble angle_tilt_z);
void clutter_behaviour_ellipse_get_tilt (ClutterBehaviourEllipse *self,
gdouble *angle_tilt_x,
gdouble *angle_tilt_y,
gdouble *angle_tilt_z);
void clutter_behaviour_ellipse_get_tiltx (ClutterBehaviourEllipse *self,
ClutterAngle *angle_tilt_x,
ClutterAngle *angle_tilt_y,
ClutterAngle *angle_tilt_z);
void clutter_behaviour_ellipse_set_tiltx (ClutterBehaviourEllipse *self,
ClutterAngle angle_tilt_x,
ClutterAngle angle_tilt_y,
ClutterAngle angle_tilt_z);
ClutterRotateDirection clutter_behaviour_ellipse_get_direction
(ClutterBehaviourEllipse *self);
void clutter_behaviour_ellipse_set_direction
(ClutterBehaviourEllipse *self,
ClutterRotateDirection direction);
ClutterBehaviourEllipse interpolates actors along a path defined by an ellipse.
Note, on applying an ellipse behaviour to an actor its position will be set to what is dictated by the ellipses initial position.
typedef struct {
void (*knot_reached) (ClutterBehaviourEllipse *ellipseb,
const ClutterKnot *knot);
} ClutterBehaviourEllipseClass;
Ellipse behaviour class
knot_reached () |
signal class handler for the ClutterBehaviourEllipse::knot_reached signal |
Since 0.4
ClutterBehaviour* clutter_behaviour_ellipse_new (ClutterAlpha *alpha,
gint x,
gint y,
gint width,
gint height,
ClutterRotateDirection direction,
gdouble begin,
gdouble end);
Creates a behaviour that drives actors along an elliptical path with
given center, width and height; the movement begins at angle_begin
degrees (with 0 corresponding to 12 o'clock) and ends at angle_end degrees;
alpha : |
a ClutterAlpha, or NULL
|
x : |
x coordinace of the center |
y : |
y coordiance of the center |
width : |
width of the ellipse |
height : |
height of the ellipse |
direction : |
ClutterRotateDirection of rotation |
begin : |
angle in degrees at which movement begins |
end : |
angle in degrees at which movement ends |
| Returns : | the newly created ClutterBehaviourEllipse |
Since 0.4
ClutterBehaviour* clutter_behaviour_ellipse_newx (ClutterAlpha *alpha,
gint x,
gint y,
gint width,
gint height,
ClutterRotateDirection direction,
ClutterFixed begin,
ClutterFixed end);
Creates a behaviour that drives actors along an elliptical path. This
is the fixed point variant of clutter_behaviour_ellipse_new().
alpha : |
a ClutterAlpha, or NULL
|
x : |
x coordinace of the center |
y : |
y coordiance of the center |
width : |
width of the ellipse |
height : |
height of the ellipse |
direction : |
ClutterRotateDirection of rotation |
begin : |
ClutterFixed angle in degrees at which movement begins |
end : |
ClutterFixed angle in degrees at which movement ends |
| Returns : | the newly created ClutterBehaviourEllipse |
Since 0.4
void clutter_behaviour_ellipse_set_center
(ClutterBehaviourEllipse *self,
gint x,
gint y);
Sets the center of the elliptical path to the point represented by knot.
self : |
a ClutterBehaviourEllipse |
x : |
x coordinace of centre |
y : |
y coordinace of centre |
Since 0.4
void clutter_behaviour_ellipse_get_center
(ClutterBehaviourEllipse *self,
gint *x,
gint *y);
Gets the center of the elliptical path path.
self : |
a ClutterBehaviourEllipse |
x : |
location to store the x coordinace of the center, or NULL |
y : |
location to store the y coordinace of the center, or NULL |
Since 0.4
gdouble clutter_behaviour_ellipse_get_angle_begin
(ClutterBehaviourEllipse *self);
Gets the angle at which movements begins.
self : |
a ClutterBehaviourEllipse |
| Returns : | angle in degrees |
Since 0.4
gdouble clutter_behaviour_ellipse_get_angle_end
(ClutterBehaviourEllipse *self);
Gets the at which movements ends.
self : |
a ClutterBehaviourEllipse |
| Returns : | angle in degrees |
Since 0.4
gdouble clutter_behaviour_ellipse_get_angle_tilt
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis);
Gets the tilt of the ellipse around the center in the given axis.
self : |
a ClutterBehaviourEllipse |
axis : |
a ClutterRotateAxis |
| Returns : | angle in degrees. |
Since 0.4
gint clutter_behaviour_ellipse_get_height
(ClutterBehaviourEllipse *self);
Gets the height of the elliptical path.
self : |
a ClutterBehaviourEllipse |
| Returns : | the height of the path |
Since 0.4
gint clutter_behaviour_ellipse_get_width (ClutterBehaviourEllipse *self);
Gets the width of the elliptical path.
self : |
a ClutterBehaviourEllipse |
| Returns : | the width of the path |
Since 0.4
void clutter_behaviour_ellipse_set_angle_begin
(ClutterBehaviourEllipse *self,
gdouble angle_begin);
Sets the angle at which movement begins.
self : |
a ClutterBehaviourEllipse |
angle_begin : |
angle at which movement begins in degrees |
Since 0.4
void clutter_behaviour_ellipse_set_angle_end
(ClutterBehaviourEllipse *self,
gdouble angle_end);
Sets the angle at which movement ends.
self : |
a ClutterBehaviourEllipse |
angle_end : |
angle at which movement ends in degrees. |
Since 0.4
void clutter_behaviour_ellipse_set_angle_tilt
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis,
gdouble angle_tilt);
Sets the angle at which the ellipse should be tilted around it's center.
self : |
a ClutterBehaviourEllipse |
axis : |
a ClutterRotateAxis |
angle_tilt : |
tilt of the elipse around the center in the given axis in degrees. |
Since 0.4
void clutter_behaviour_ellipse_set_height
(ClutterBehaviourEllipse *self,
gint height);
Sets the height of the elliptical path.
self : |
a ClutterBehaviourEllipse |
height : |
height of the ellipse |
Since 0.4
void clutter_behaviour_ellipse_set_width (ClutterBehaviourEllipse *self,
gint width);
Sets the width of the elliptical path.
self : |
a ClutterBehaviourEllipse |
width : |
width of the ellipse |
Since 0.4
ClutterAngle clutter_behaviour_ellipse_get_angle_beginx (ClutterBehaviourEllipse *self);
Gets the angle at which movements begins.
self : |
a ClutterBehaviourEllipse |
| Returns : | a ClutterAngle |
Since 0.4
ClutterAngle clutter_behaviour_ellipse_get_angle_endx (ClutterBehaviourEllipse *self);
Gets the angle at which movements ends.
self : |
a ClutterBehaviourEllipse |
| Returns : | a ClutterAngle |
Since 0.4
ClutterAngle clutter_behaviour_ellipse_get_angle_tiltx (ClutterBehaviourEllipse *self, ClutterRotateAxis axis);
Gets the tilt of the ellipse around the center in the given axis.
self : |
a ClutterBehaviourEllipse |
axis : |
a ClutterRotateAxis |
| Returns : | a ClutterAngle |
Since 0.4
void clutter_behaviour_ellipse_set_angle_beginx
(ClutterBehaviourEllipse *self,
ClutterAngle angle_begin);
Sets the angle at which movement begins.
self : |
a ClutterBehaviourEllipse |
angle_begin : |
ClutterAngle at which movement begins |
Since 0.4
void clutter_behaviour_ellipse_set_angle_endx
(ClutterBehaviourEllipse *self,
ClutterAngle angle_end);
Sets the angle at which movement ends.
self : |
a ClutterBehaviourEllipse |
angle_end : |
ClutterAngle at which movement ends |
Since 0.4
void clutter_behaviour_ellipse_set_angle_tiltx
(ClutterBehaviourEllipse *self,
ClutterRotateAxis axis,
ClutterAngle angle_tilt);
Sets the angle at which the ellipse should be tilted around it's center.
self : |
a ClutterBehaviourEllipse |
axis : |
a ClutterRoateAxis |
angle_tilt : |
ClutterAngle tilt of the elipse around the center in the given axis |
Since 0.4
void clutter_behaviour_ellipse_set_tilt (ClutterBehaviourEllipse *self,
gdouble angle_tilt_x,
gdouble angle_tilt_y,
gdouble angle_tilt_z);
Sets the angles at which the ellipse should be tilted around it's center.
self : |
a ClutterBehaviourEllipse |
angle_tilt_x : |
tilt of the elipse around the center in X axis in degrees. |
angle_tilt_y : |
tilt of the elipse around the center in Y axis in degrees. |
angle_tilt_z : |
tilt of the elipse around the center in Z axis in degrees. |
Since 0.4
void clutter_behaviour_ellipse_get_tilt (ClutterBehaviourEllipse *self,
gdouble *angle_tilt_x,
gdouble *angle_tilt_y,
gdouble *angle_tilt_z);
Gets the tilt of the ellipse around the center in Y axis.
self : |
a ClutterBehaviourEllipse |
angle_tilt_x : |
location for tilt of the elipse around the center in X axis in degrees, or NULL. |
angle_tilt_y : |
location for tilt of the elipse around the center in Y axis in degrees, or NULL. |
angle_tilt_z : |
location for tilt of the elipse around the center in Z axis in degrees, or NULL. |
Since 0.4
void clutter_behaviour_ellipse_get_tiltx (ClutterBehaviourEllipse *self,
ClutterAngle *angle_tilt_x,
ClutterAngle *angle_tilt_y,
ClutterAngle *angle_tilt_z);
Gets the tilt of the ellipse around the center in Y axis.
self : |
a ClutterBehaviourEllipse |
angle_tilt_x : |
ClutterAngle location for tilt of the elipse around the center in X axis, or NULL. |
angle_tilt_y : |
ClutterAngle location for tilt of the elipse around the center in Y axis, or NULL. |
angle_tilt_z : |
ClutterAngle location for tilt of the elipse around the center in Z axis, or NULL. |
Since 0.4
void clutter_behaviour_ellipse_set_tiltx (ClutterBehaviourEllipse *self,
ClutterAngle angle_tilt_x,
ClutterAngle angle_tilt_y,
ClutterAngle angle_tilt_z);
Sets the angle at which the ellipse should be tilted around it's center.
self : |
a ClutterBehaviourEllipse |
angle_tilt_x : |
ClutterAngle tilt of the elipse around the center in X axis |
angle_tilt_y : |
ClutterAngle tilt of the elipse around the center in Y axis |
angle_tilt_z : |
ClutterAngle tilt of the elipse around the center in Z axis |
Since 0.4
ClutterRotateDirection clutter_behaviour_ellipse_get_direction (ClutterBehaviourEllipse *self);
Retrieves the ClutterRotateDirection used by the ellipse behaviour.
self : |
a ClutterBehaviourEllipse |
| Returns : | the rotation direction |
Since 0.4
void clutter_behaviour_ellipse_set_direction
(ClutterBehaviourEllipse *self,
ClutterRotateDirection direction);
Sets the rotation direction used by the ellipse behaviour.
self : |
a ClutterBehaviourEllipse |
direction : |
the rotation direction |
Since 0.4